Editor’s Choice: Top 5 Best Skateboard Trucks

If you are in a hurry and just want to find out what the best skateboard truck is, then we recommend Venture Polished 5.25 LowVenture Polished 5.25 Low as the best one.

If you are planning to DIY a skateboard, choosing the best skateboard truck must be the next thing that you have to think about after making the right decision about the skateboard deck; Surely, if the skateboard truck is just broken, then the skateboarder will also face with the issue of choosing a right skateboard truck for a replacement. However, to be honest, it is not an easy job, especially for the skateboarding beginners, to find yourself the best trucks for skateboards.

But don’t worry too much, and this tip article is here just helping you out with how to choose the best skateboard trucks. So what kind of skateboard trucks should you get? Basically, a suitable skateboard truck must fit the deck and wheels very well, so you can do skateboarding tricks easily, and have a good boardfeel. And to accomplish this goal, we need to care much about two factors of the skateboard trucks, its width and height.

In this article, were going to review the following skateboard trucks:

Width

As for the truck width, we know that different skateboards trucks have their different sizes. When we choose a skateboard truck, what size of the skateboard trucks should we get? The theory is that the skateboard truck should always fit the deck. If the truck is much wider than the deck, the gravity center of the skateboard will probably move to the side of the deck. If so, it would increase the difficulty in doing some skateboarding tricks, like flip tricks, and poor boardfeel. While, if the truck is much narrower than the deck, its stability would be affected drastically. The best way is that the skateboard truck is just as same wide as the deck.

But technically, there are two width numbers for a truck, the hangar width, and the axle width. Check their difference in the following illustration. So which number should we refer to when choosing the skateboard trucks, the hangar width or the axle width?

Skateboard Truck Parts
Skateboard Truck Parts

Mostly, the manufacturers describe their truck width by the hangar width. However, the hangar width is not so friendly for choosing the skateboard trucks, and I would like to recommend skaters using the axle width to make sure that skateboard truck is as same wide as the deck. Surely, if the truck width is a little larger or smaller than the deck, +/-0.125 inches, it is also totally OK. But if it is bigger than 0.125 inches, I would strongly not recommend it. And in the following exact best skateboard trucks examples, I would focus on this data and give you the practical suggestion.

Bonus Tip: If you are looking for the specific skateboard trucks for riding on the street, in the skatepark, or vert, the width will differ. I would recommend the skateboard truck with about 7.5 inches wide for street, 8.25 inches more or less wide for the skatepark, and about 8.75 inches for the vert.

Height

The height of skateboard trucks also matters when we choose a skateboard truck. Firstly, we need to make it clear what the truck height is, and what trucks can be the low trucks, mid ones, or high ones. Borrowing the standards from SkateDeluxe, the truck height is the distance between the baseplate and the middle of the axle. And the low trucks is with 46-49 mm height, mid one is 50-53 mm, and high one is 53.5-58 mm.

The low truck means that the skateboard would be relatively lighter than one with the high truck, so it may be easy for some skaters to do some tricks. Besides, the low truck can ensure much more stability for the skateboard since the deck is much closer to the ground. Because of this feature, I normally recommend the beginner and kids using the low trucks. While it also may bring you some bad things. Because it is lower, the wheel bites would be common to happen. And to solve it, you need to make sure the wheels are small. And on the other hand, if the wheels of your skateboard are small, you need to choose the low truck to avoid the wheel bites, too.

Compared to the low truck, the high truck is much further away from the ground, which means that the tails of the skateboard will go deeper when you pop off it. And the inclination of the skateboard will be steeper. Theoretically, you will pop off the skateboard higher and do some tricks higher, for example, the Ollie. And the wheel bites would be much less to happen. But at the same time, you need also to confront its bad things. It would be heavier than the low one. And the stability will decrease since it’s high. Technically, High trucks are OK with all wheels with different sizes. But to make sure of the safety, I would recommend you installing large wheels on it. And on the other hand, if you are looking for the skateboard trucks for your large skateboard wheels, then I would recommend you choose the high truck.

So the mid trucks seem much better than the high and low ones. However, you have to remember that not all skateboard wheels fit all trucks, and the mid-truck should also fit the right size wheels. And here are the detailed comparison table of truck height and wheel size in the following. I would also review this feature in the following specific items recommended, and give you more practical suggestion on it.

Truck TypeTruck HeightRecommended Maximum Wheel Size
Low46 mm51 mm
47 mm52 mm
48 mm52 mm
49 mm54 mm
Mid50 mm56 mm
52 mm60 mm
High53.5 mm62 mm
55 mm63 mm
56 mm64 mm
58 mm65 mm

Stats from SkateDeluxe

Surely, these two are definitely not all factors that we should consider when selecting the best trucks for skateboards, but also there are some more like if we care about its durability, we need to check its material, etc. But I do not intend to discuss them here, but show them in the following content about five examples of best skateboard trucks, which I personally recommend. Check them now.

What is the Best Brand of Skateboard Trucks?

This topic must be one of the most common discussions that skaters have joined in. Seriously, this is kind of a question without the exact answer, since each skater has his or her favorite brand. But to help people choose the best skateboard trucks, I plan to list the top five skateboard truck brands base on my personal experience. And the exact trucks recommended will be also from these brands. And the best brands of skateboard trucks are Thunder, Independent, Venture, Tensor, and the Element.

Best Skateboard Truck: Thunder Polished Team Skateboard Trucks

The official type number of this Thunder Polished Team Skateboard Truck is HI 151. Do not be fooled by its name. It is actually a mid-height truck with 52 mm. So the size of the wheels recommended is 60 mm. Its hangar width is 6.15 inches, and axle width is 8.75 inches. You know that the axle width should as same as the deck width, and 0.125 inches margin is also totally OK. So the truck can fit the 8.625-inch to 8.875-inch wide decks. The color of this truck is silver. And you need to know that this truck is sold individually since most trucks are sold in pair.

Pros:

  • Endurable
  • Awesome turning
  • Good quality
  • Smooth as butter

Cons:

  • Sold individually, which many users did not notice

>> Check Price on Amazon <<

 

And at the same time, as you can see, the HI 151 number is very confusing, and most skaters do not know what it means. Honestly, the other Thunder trucks are also marked with such numbers. So to make it easy and clear, I will show you the different Thunder truck model with specific width and height data.

  • Model 143with 50 mm high, 5 inches hangar-wide and 7.125 inches axle-wide
  • Model 145 Low with 47 mm high, 5.0 inches hangar-wide and 7.625 inches axle-wide
  • Model 145 High with 50 mm high, 5.0 inches hangar-wide and 7.625 inches axle-wide
  • Model 147 High with 50 mm high, 5.39 inches hangar-wide and 8 inches axle-wide
  • Model 148 High with 50 mm high, 5.67 inches hangar-wide and 8.25 inches axle-wide
  • Model 149 High with 52 mm high, 5.9 inches hangar-wide and 8.5 inches axle-wide

Best Skateboard Truck: Independent Silver 139mm Skateboard Trucks

Independent must be my personal favorite skateboard truck brand. For this one, firstly, its name may tell you something wrong. The 139mm does not really mean that this truck is 139 mm high or wide. It is just a model type number. The full type number of this truck is 139mm low. It is, in fact, 48 mm high. The 52mm-size wheels can fit it very well. And its axle width is 8 inches, a good option for the decks with 7.875 inches to 8.125 inches width.

Pros:

  • Grind smoothly
  • Turn well
  • Easy to install
  • Great quality

Cons:

  • May need a bit of tightening up when all was done

>> Check Price on Amazon <<

 

And the detailed specs of other Independent skateboard truck types are:

  • 129 Low with 48 mm high, 5.0 inches hangar-wide and 7.625 inches axle-wide
  • 129 Standard with 55 mm high, 5.0 inches hangar-wide and 7.625 inches axle-wide
  • 139 Standard with 55 mm high, 5.39 inches hangar-wide and 8 inches axle-wide
  • 144 Standard with 55 mm high, 5.625 inches hangar-wide and 8.25 inches axle-wide
  • 149 Standard with 55 mm high, 5.9 inches hangar-wide and 8.5 inches axle-wide
  • 159 Standard with 55 mm high, 6.15 inches hangar-wide and 8.75 inches axle-wide
  • 169 Standard with 55 mm high, 6.5 inches hangar-wide and 9.125 inches axle-wide
  • 215 Standard with 55 mm high, 7.36 inches hangar-wide and 10 inches axle-wide

Best Skateboard Truck: Venture Polished 5.25 Low Skateboard Trucks

This Venture 5.25 Low is 48 mm high, perfectly fitting 52 mm wheels. The hangar width is 5.39 inches and axle width is 8 inches, so the deck width can be 7.875 inches at least or 8.125 inches at most. One of its outstanding feature, which impresses me most is that the venture symbols are put on each of the baseplate instead of the Axel. This makes its style look lovely.

Pros:

  • Lovely color
  • Great for grinding
  • Super light
  • Good quality
  • Nice turning

Cons:

  • Almost none

>> Check Price on Amazon <<

Other Venture skateboard truck types and detailed height/width data are:

  • 0 Low with 48 mm high, 5.0 inches hangar-wide and 7.625 inches axle-wide
  • 0 High with 53.5 mm high, 5.0 inches hangar-wide and 7.625 inches axle-wide
  • 25 High with 53.5 mm high, 5.39 inches hangar-wide and 8 inches axle-wide
  • 8 High with 53.5 mm high, 6.59 inches hangar-wide and 8.5 inches axle-wide

Best Skateboard Truck: Tensor MAGNESIUM SLIDER BLUE Skateboard Trucks

This Tensor skateboard truck would be also called Tensor 5.0 Low. It is 46 mm high, a pretty low skateboard truck. So for tall skaters, I will not recommend it. And for such truck height, 51 mm wheels would be better. Its hangar width is 5.0 inches and axle width is 7.625 inches. So the best fitting deck would be 7.5 inches to 7.75 inches wide. It is super light, 25% lighter than the industry standard, which is good for doing some tricks, like the Ollie. Also, if you are the ones who do not like light skateboard trucks, then you need really care about this feature.

Pros:

  • Durable
  • Easy to use

Cons:

  • Almost too light for comfort. This would matter if you do not like the truck too light

>> Check Price on Amazon <<

Other Tensor skateboard trucks and specs listed in the following:

  • 25 Low with 46 mm high, 5.25 inches hangar-wide and 8 inches axle-wide
  • 25 Regular with 52 mm high, 5.25 inches hangar-wide and 8 inches axle-wide
  • 5 Low with 46 mm high, 5.5 inches hangar-wide and 8.125 inches axle-wide
  • 5 Regular with 52 mm high, 5.5 inches hangar-wide and 8.125 inches axle-wide
  • 75 Regular with 52 mm high, 5.75 inches hangar-wide and 8.375 inches axle-wide
  • 0 Regular with 52 mm high, 6 inches hangar-wide and 8.625 inches axle-wide

Best Skateboard Truck: Element 5.5 Aluminum Pro Skateboard Trucks

This Element 5.5 Pro is just the upgrade of 5.5 standard. Compared to the previous one, it has reinforced baseplate, greater durability, and more to make sure that skaters can have a nice responsive riding journey. But the width and height data does not change at all. It is 52 mm high, perfect for 60 mm wheels. The axle width is 8.125 inches, so it can fit the decks with 8.0 inches to 8.25 inches width. The other version of this brand is Element 5.0 Low. It is 48 mm high and 7.625 axle wide.

Pros:

  • Good construction
  • Great performance
  • Durable
  • Air-craft grade axles and kingpins

Cons:

  • May need a bit of tightening up

>> Check Price on Amazon <<

 

Conclusion

Please note that the skateboard trucks recommended cannot fit all decks and wheels, so please refer to the extra information in the end of each part, and find the skateboard truck with perfect width and height. Remember the width and height data is very important. And also if you have any thought on how to choose the best skateboard trucks, please tell us in the comments.

Leave a Comment

Your email address will not be published. Required fields are marked *